DIY Wireless 120dB Loud Alarm System Tuya WIFI Siren Speaker Detectors Smart Hom

Product Description

Overview:
- DIY alarm system with the capability to add up to 40 sensors, 10 remotes, and 10 doorbell buttons.
- Programmed and ready to use right out of the box.
- Inexpensive and simple intruder alarm system
- Can be easily transported and set up in different locations
- No network, GSM, or Wi-Fi capabilities required
- Press the "S" button on the remote to trigger the panic alarm

Suitable Applications:

- Sheds, garages, barns, shops, single-story homes, cabins, RVs, and other small spaces that need protection

Technical Specifications:
- Dimensions: 12mm x 10.2mm x 11mm
- Power: AC 110V to 220V, 92cm/3ft power cable (can be extended)
- Wireless frequency: 433MHz
- Operating environment: -15°C to 55°C, 40% to 70% relative humidity
- Typical wireless range: 328ft (100m) in open areas, reduced by obstacles

1. Works with Alexa or Works with Google Assistant
- Seamless integration with your preferred voice assistant
- Easily control and manage the alarm system using voice commands2. Door Window Detector Magnetic Sensor
- Designed for rental properties, hotels, and single apartments
- Discreetly monitor doors and windows to enhance overall security3. Alarm Systems to Secure Your Home
- WiFi-enabled house alarm system works with PIR motion sensors and door sensors
- Powerful 120-decibel siren to deter and scare off potential intruders4. Wide Angle Detection
- 110-degree horizontal field of view
- 60-degree vertical field of view for comprehensive coverage area5. Smart Alert Notifications
- Instantly send push notifications to your smartphone when the door or window is opened
- Only supports 2.4GHz WiFi networks for reliable connectivity
Setup and Usage:

1. Connect the siren unit to a power outlet.
2. Remove the insulation strip from the alarm sensors to activate them.
- Door/window sensor will flash once when turned on.
- Open the motion detector, check battery polarity, then turn it on.
3. Mount the sensors in the desired locations, drilling may be required for the motion detector.

Pairing Process:
1. Connect the siren to power, wait 6 seconds.
2. Disconnect and reconnect the siren's power 3 times.
- The siren will beep each time.
3. After the 3rd beep, the siren will enter pairing mode.
4. Pair the sensors:
- Motion detector: Turn it on to pair.
- Door/window sensor: Separate it from the magnet.
- Remote: Press any button to pair.
5. Once all devices are paired, disconnect the siren's power to exit pairing mode.
6. Reconnect the siren to complete the setup.

Product Parameter

1.Host speaker
Size: L*W*H 12mm * 10.2mm * 11mm
Power: AC 110-240V
the wireless operating frequency: 433MHz
the use of the environment: stability: 0 -55 , Relative Humidity: 40% -70%
the alarm sound: greater than 100 db

2. Motion PIR Infrared Detector(with DC9V Battery Included and Wall Mounting)

Standby Current: less than 12uA ;
Alarm Current:less than 15mA ;
Operation Temp: -10C~50C;Humidity:no more than 90% ;
Installation Height: About 2M. Installation Angel:About 60~110 ;
Detecting Distance: 5-8M ;
Transmissons Time no less than 1s ;
Wireless Freq: 433MHz ;
Transmit Distantce:Outdoor 100M(no obstacle), Indoor:10~15M

3.Door / Windor Sensor(with DC12V Battery Included)

Operation Current:8~15mA ;
Quiescent Current:3uA ;
Operation Freq:433MHz ;
Operation Temp: -10C~50C;Humidity:no more than 90% ;
Installation: less than 15mm between 2 parts ;
Transmit Distantce:Outdoor 100M(no obstacle),Indoor:10M

4.Remote Control(with DC12V Battery Included)

Operation Current:10MA
Operation Freq:433MHz
2262 Learning Code
Work of Alarm System
4 Button:Arm Away Mode, Arm At home Mode, Emergency Mode and Disarm Mode)
Sending Distantce:Outdoor 80~100M(no obstacle), Indoor:8~10M
Operation Temp: -10C~50C;Humidity:90%

5.MC3 Door Sensor
6.S20 Smoke Detector
- Triggers alarm when smoke is detected

7.P831 Motion Detector

Q&A:

Q: Do I need to order an alarm panel (control center) for this siren?

A: No, this siren work as an alarm system, it can work with wireless sensors to protect your house.

A: Yes! This siren alarm system can work with 6 remote controllers and 30 wireless sensors like wireless gas detectors, smoke detectors, co carbon detectors, door/window sensors, pir motion detectors, water leakage sensors, vibration sensors and glass break detectors and so on.

A: Yes! User can use 1 remote controller to control 2 or more siren systems, or 1 sensors work with 2 or more siren.

About Prime Living

Prime Living is a Canadian online store offering a carefully selected range of quality products for home, automotive, tools, outdoor living, electronics and more.

We are committed to fast order processing, secure packaging and reliable tracked shipping to provide an excellent shopping experience.

Shipping policy

We carefully handle each order to ensure your package arrives quickly and safely. Please note that factors such as weather, postal traffic, or carrier performance may occasionally cause delays beyond our control.

We provide free shipping and dispatch all orders within 2 business days of payment, often sooner. All shipments are sent via international express air shipping, with a tracking number provided so you can follow your order every step of the way.

. Please provide a physical address, as we do not ship to P.O. Boxes.

Returns

Your satisfaction is important to us. Hexlight offers a 14-day Free return policy: if you are not fully satisfied with your purchase, you may request either a full refund or an exchange. All return shipping costs are fully covered by us.

Condition

Brand New

Shipping

This item is shipped directly from our supplier in China with tracking.