Product Description
Pixracer PRO Pixhawk PX4 Autopilot Xracer Flight Controller M8N GPS Set for RC Quadcopter Ardupilot Drone H745 VTOL Boat
Pixracer PRO Pixhawk PX4 Autopilot Xracer Flight Controller M8N GPS Set for RC Quadcopter Ardupilot Drone H745 VTOL BoatPIXRACER PRO
The Pixracer Pro has been designed primarily for the demanding requirements of small multicopters, but of course can be used on planes and other vehicles which require no more than 8 pwm outputs for controlling escs and motors.
Specifications
Specifications | mRo Pixracer Pro |
Main Processor | 32-bit STM32H743 Cortex M7 RISC core with FPU 460 MHz |
IO Processor | No |
RAM | 1024 KB RAM |
Flash | 2 MB FRAM |
Crypto / Hash Processor | No |
Accelerometers / Gyros / Mags | Accelerometers / Gyros / Mags |
Sensors – Dampened | Bosch BMI085 (6DOF) (internally vibration dampened) |
Sensors | Invensense/TDK ICM-20602 (6DOF) |
Internal Magnetometer | AK09916 inside ICM-20948 |
Barometer | Infineon DPS310 barometer (Very smooth and NO light sensitivity) |
Interfaces and Protocols | 6x UART (serial ports) [2x with HW flow control,1x FRSky Telemetry (D or X types), 2x General Purpose & 1x GPS+I2C]. 1x PPM sum input signal Supported RC input protocols: |
Connectors | – JST-GH |
Pin Headers | Yes – 8 Servo |
Conformal Coating | No |
Extended Testing and Burn In | No |
Custom Carrier Board Support | No |
LED | Yes (RGB) |
Dimensions | Width: 36mm (1.42”) |
Weight | 9.09g (.31 oz) |
Mounting Holes | 4mm holes at 31.5mm spacing, Silicone grommets for m3 screws |
Protector Case | Optional |
Typical Platforms | -Multirotor |
Compatibility | PX4 >1.13.0, Ardupilot |
Firmware
The mRo Pixracer Pro is compatible with the following firmware:
ArduPilot
-ArduCopter 4.x
-ArduPlane 4.x
-ArduRover 4.x
PX4
-PX4 greater than v1.13.0 (master or beta only until v1.13.1 release)
Normal Usage Guide
-> BATT_VOLT_PIN= 14
-> BATT_CURR_PIN= 15
All connectors follow the Dronecode connector standard. All connectors are JST-GH.Pixracer Pro do not have a safety switch option, If there’s a need to have one a CAN switch is required.
Pinout
About Prime Living
Prime Living is a Canadian online store offering a carefully selected range of quality products for home, automotive, tools, outdoor living, electronics and more.
We are committed to fast order processing, secure packaging and reliable tracked shipping to provide an excellent shopping experience.
Shipping policy
We carefully handle each order to ensure your package arrives quickly and safely. Please note that factors such as weather, postal traffic, or carrier performance may occasionally cause delays beyond our control.
We provide free shipping and dispatch all orders within 2 business days of payment, often sooner. All shipments are sent via international express air shipping, with a tracking number provided so you can follow your order every step of the way.
. Please provide a physical address, as we do not ship to P.O. Boxes.
Returns
Your satisfaction is important to us. Hexlight offers a 14-day Free return policy: if you are not fully satisfied with your purchase, you may request either a full refund or an exchange. All return shipping costs are fully covered by us.
Condition
Brand New
Shipping
This item is shipped directly from our supplier in China with tracking.