ZD850 6C PRO M10 Full Carbon Fiber 850mm Hexa-Rotor Frame BLHELI 40A ESCFlight

Product Description

PIXHAWK 6C PRO

The Pixhawk® 6C PRO is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot® pre-installed. STMicroelectronics® based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.

The Pixhawk® 6C PRO's H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.

The Pixhawk 6C PRO includes high-performance, low-noise IMUs on board, designed to be cost effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.

The Pixhawk® 6C PRO is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application.

Key Design Points

• High performance STM32H743 Processor with more computing power & RAM

• Build-in Buzzer,Build-in RGB LED,support Independent external Safety Button,With Plastic Case

• New cost-effective design with low-profile form factor

• Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings

• IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs

Technical Specification

Processors & Sensors

• FMU Processor: STM32H743
  32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM

• IO Processor: STM32F103
  32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM

On-board sensors

• Accel/Gyro: ICM-42688-P

• Accel/Gyro: BMI055

• Mag: IST8310

• Barometer: MS5611

Electrical data

Voltage Ratings:

• Max input voltage: 6V

• USB Power Input: 4.75~5.25V

• Servo Rail Input: 0~36V

Current Ratings:

• TELEM1 Max output current limiter: 1.5A

• All other port combined output current limiter: 1.5A

Mechanical data

• Dimensions: 85 * 45 * 10 mm

• Weight (Plastic Case) : 33g
  

PowerModulo(support 12S)

Simple Package:

3 Pairs 3K Carbon Fiber Propeller 1555 + 6 PCS D4114 400KV Motor +

PIXHAWK 6C PRO+2'PWM Module+Safety Button+4G TF Card+M10 GPS+GPs Holdor+Shock Absorber+PM02 PowerModulo(support 12S)

High Pacage:

3 Pairs 3K Carbon Fiber Propeller 1555 + 6 PCS D4114 400KV Motor +

PIXHAWK 6C PRO+2*PWM Module+I2C Expansion Board +RGB LED Module+ Safety Button+4G TF Card+M10 GPS+GPS Holder+Shock Absorber+PM02 Power Module(support 12S)

433/915MHZ 100MW :

3 Pairs 3K Carbon Fiber Propeller 1555 + 6 PCS D4114 400KV Motor +

PIXHAWK 6C PRO+2*PWM Module+ Safoty Button+4G TF Card M10 GPS+GPs Holder+Shock Absorber+PM02 Power Module
(support 12S)+RadloTelemetry V6 433/915MHZ 100MW

433/915MHZ 500MW :

3 Pairs 3K Carbon Fiber Propeller 1555 + 6 PCS D4114 400KV Motor +

PIXHAWK 6C PRO+2*PWM Module+I2C ExpansIon Board +RGB LED Module+Safety Button+4GTF Card+M10 GPS+GPs
Holder+Shock Absorber+PM02 Power Module(support 12S)+
Radio Telemetrv V6 433/915MHZ 500MW

433/915MHZ 1000MW :

3 Pairs 3K Carbon Fiber Propeller 1555 + 6 PCS D4114 400KV Motor +

PIXHAWK 6C PRO+2*PWM Module+I2C Expansion Board+RGB LED Module+ Safety Button+4G TF Card+M10 GPS+GPs
Holder+Shock Absorber+PM02 Power Module(support 12S)+
Radlo Telemetry V6 433/915MHZ 1000MW

• ZD850 PRO Drone Frame*1M10 GPS:
• The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.

  It also comes with the IST8310 compass.This module ships with a baud rate of 115200 5Hz.

  The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.
  

  1555 3k carbon Fiber poropeller*3Paira6PCS D4114 400KV Motor6PCS 40A BEC

  Features:

  
  - Using Multicopter special program, fast throttle response,surpasses all kinds of open source software;- Firmware was optimized specifically for disc motor, and it has a very good compatibility;- Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use;- Throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight;- Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signal);- Using MOSFET special driver IC, its performance and stability far surpass the driving circuit with discrete components built;- Ultra-low resistance MOSFET, strong flow capacity.
• OLED Module can display some message.
  

  Radio Telemetry V6

About Prime Living

Prime Living is a Canadian online store offering a carefully selected range of quality products for home, automotive, tools, outdoor living, electronics and more.

We are committed to fast order processing, secure packaging and reliable tracked shipping to provide an excellent shopping experience.

Shipping policy

We carefully handle each order to ensure your package arrives quickly and safely. Please note that factors such as weather, postal traffic, or carrier performance may occasionally cause delays beyond our control.

We provide free shipping and dispatch all orders within 2 business days of payment, often sooner. All shipments are sent via international express air shipping, with a tracking number provided so you can follow your order every step of the way.

. Please provide a physical address, as we do not ship to P.O. Boxes.

Returns

Your satisfaction is important to us. Hexlight offers a 14-day Free return policy: if you are not fully satisfied with your purchase, you may request either a full refund or an exchange. All return shipping costs are fully covered by us.

Condition

Brand New

Shipping

This item is shipped directly from our supplier in China with tracking.