Product Description
B-CUBE PRO V5 5inch FPV Drone Frame Kit Carbon Fiber Racing Quadcopter Freestyle INAV Beatflight F722 Ardupilot Flight Control
B-CUBE PRO V5 5inch FPV Drone Frame Kit Carbon Fiber Racing Quadcopter Freestyle INAV Beatflight F722 Ardupilot Flight ControlB-CUBE PRO V5 5-inch Rack
Product parameters:
Wheelbase:260mm (5inch)
Weight:Approximately 163g (including printed copies)
Thickness:Bottom plate 2.5mm, upper plate 2.0mm, arm 5.0mm
Paddle:5-inch paddle
Flight control hole spacing:30.6 * 30.6mm (M3)，20 * 20mm (M2)
Hole spacing for image transmission:30.6 * 30.6mm (M3),20 * 20mm (M2)
Camera installation width:19mm
Motor installation hole positions:9 * 9mm (M2) and 12mm * 12mm (M2)
Battery:3S/4S 5200mAh
3D print:
1 camera brackets,
1 antenna pedestal,
Print color:Black TPU
Recommended configuration:
Motor:2205 2300KV motor
ESC:B-CUBE 4IN1-30MM or 20MM 45A
Battery:3S-4S
Paddle:5045
Image transfer:B-CUBE VTX800 VTX1000 VTX1600 VTX2500
F4V3S PLUS Flight Controller
Use UART6 for remote control receiver (PPMor SBUS)
B-CUBE F722 Flight Controller
B-CUBE F745 V2 Flight Controller
B-CUBE H743 Flight Controller
Specifications:
l Chip:STM32H743VIT6(480MHZ)
l Gyro:ICM-42688-P*2
l Barometer:SPL06-001
l OSD Chip:AT7456E
l Black box:128MM
l LED Program:Support
l BB buzzer:Support
l Input voltage:3-6S
l I2C Connector:Support
l BEC:5V/2.5A
l BEC:10V/2.0A
l Cam Input:Support
l USART:UART1,UART2.UART3.UART4.UART6.UART7
l Receiver:ELRS(CRSF).TBS(CRSF).SBUS.IBUS.DSM2.DSMX
l GPS:YES
l COMPASS:YES
l HD O3:YES
l ESC Signal:Dshoot150.Dshot300,Dshot600
l USB:TYPE-C
l Current Port:Yes.
l Voltage Sensor:Yes
l Firmware: cleanflight/betaflight/inav/ardupilot
l FC firmware:betaflight_4.5.2_STM32H743_JHEH743_HD.hex/ inav_8.0.1_JHEMCUH743HD.hex / arducopter4.6_with_bl.hex
l Install hole:30.5*30.5*4MM
l Board size:36*36MM
l Weight:7.9g
VTX1000 1W Video Transmitter
Lithium Polymer Battery Specification Sheet
Basic Information
Brand: TCB
Type: LiPo Battery (Lithium Polymer)
Capacity: 5200 mAh
Voltage: 11.1V (3S)
Discharge Rate: 35C (Continuous)
Connector: XT60
Dimensions: 130mm x 40mm x 25mm
Electrical Characteristics
Nominal Voltage: 11.1V
Charging Voltage: 12.6V (4.2V per cell)
Discharge Rate: 35C (Continuous), potentially higher peak rate
Internal Resistance: Low resistance design
Compatible Voltage Range: 9.0V - 12.6V
Physical Characteristics
Weight: Approximately 310g (depending on design)
Casing Material: High-strength polymer casing
Color: Orange
Dimensions: 130mm (Length) x 40mm (Width) x 25mm (Height)
ELRS 2.4G Receiver RX
Package Included:
Nano Receiver x 1
T type receiver antenna x 1
Heat shrink tube x 1
30AWG Silicone Wire x 4
Built-in 2000mAh battery and USB charge supported.
RS2205 2300kv Motor:
RGB And Beep
About Prime Living
Prime Living is a Canadian online store offering a carefully selected range of quality products for home, automotive, tools, outdoor living, electronics and more.
We are committed to fast order processing, secure packaging and reliable tracked shipping to provide an excellent shopping experience.
Shipping policy
We carefully handle each order to ensure your package arrives quickly and safely. Please note that factors such as weather, postal traffic, or carrier performance may occasionally cause delays beyond our control.
We provide free shipping and dispatch all orders within 2 business days of payment, often sooner. All shipments are sent via international express air shipping, with a tracking number provided so you can follow your order every step of the way.
. Please provide a physical address, as we do not ship to P.O. Boxes.
Returns
Your satisfaction is important to us. Hexlight offers a 14-day Free return policy: if you are not fully satisfied with your purchase, you may request either a full refund or an exchange. All return shipping costs are fully covered by us.
Condition
Brand New
Shipping
This item is shipped directly from our supplier in China with tracking.