Product Description
3-Axis Brushless Gimbal Camera Mount & 32bit Storm32 Controller Broad For Gopro3/Gopro4/SJ4000/Xiaomi FPV Camera Drone
3-Axis Brushless Gimbal Camera Mount & 32bit Storm32 Controller Broad For Gopro3/Gopro4/SJ4000/Xiaomi FPV Camera DronePlease note that the camera is not included.
3-Axis Brushless Gimbal Camera Mount & 32bit Storm32 Controller Broad
3-Axis Brushless Gimbal Mount:
Description:
- Simple structure and light weight,CNC aluminum alloy structure
- Brushless motor direct drive
- With anti-vibration rubber balls,easy to adjust
- Compatible with Gopro 4 3,2,1
- With 3pcs 2804 160t motor
- With 32bit Storm32 firmware gimbal controller, sensor
- With motor protector which can help heat dissipation
Specification:
- Power supply: 9-15V(3-4S)
- Drive current: Max.1.5A
- Height: 11cm
- Color: White
2804 100KV Brushless Gimbal Motor
Model :2804 100KV
Weight:41.5g
Motor Diamension:34mm*hgt15mm
Stator Diameter:DIa 28mm*hgt 4mm
Copper Wire(OD):0.19mm
Configuration:12N14P
Resistance:11.2ohms
Base center pitch:16mm 19mm
Pre-wound: with 100 turns hollow shaft
Camera range(Torque):200g-400g
Test Voltage:11.1V
Max Voltage:14.8v
Test Current:0.0099A
Max Current:5A
Test Rotational Speed:1637 rpm
Max Rotational Speed:2180rpm
Storm32 BGC 32Bit 3-Axis Gimbal Controller:
-Hardware:Storm32BGC-Hardware Version:V1.32-Firmware:o323bgc-release-v096Software:Download the GUl software from here,https://github.com/oliw42/storm32bgc/blob/master/firmware%20binaries%20%26%20gui/o323bgc-release-v096-v20160319.zipHow to install:1. Remove vibration ball,open at the mounting plate.2.Lock mounting plate with screws at the bottom of the craft.3.Install the shock absorber ball.4. Install the camerawith a belt style compact camera.Note:Install the camera(be sure to install the camera properly,otherwise it will shake),power on the gimbal and stabilizeit for above 3o seconds,do not shake the gimbal,keepithanging,do not touch the camera with hands,keep itsuspended.After hearing the sound,it can be used normally.More information please read here,https:/blog.rctoysky.com/?p=831
-M0T0:Connection Pitch(Pitch) Motor-M0T1:Connection Roll(Roll) Motor
-M0T2:Connection YAW(Direction) Motor
-RC Port:Remont control port.during normal operation,RCO-2 can be accessed by the 3-way PWM singal as a control used when updating the firmware RCO=UAER-RX RC1=UART-TX,SPEKRUM,S-BUS signal is connected RC-O
-RC2 Port:RC20-3 can connect up to four-way Pwm signal as a control use.
-I2C Port:Then the camera's sensor
-I2C Port #2:I2C board on the back of 2# connect external sensors using alternative imu on the motherboard.
-IR Port:Contact infrared light-emitting diode,you can remote control the camera at sony.
-USB Port:0.46 firmare can be used later usb transfer parameters directly connected to the computer.
- Processor: STM32F103RC at 72Mhz
- Motor driver: DRV8313 with short circuit, overheat protection
- Onboard gyro and acceleration sensor MPU6050
- IR LED Interface
- Futaba S-BUS
- Spektrum satellite port
- 7CH PWM/Sum-PPM input/output
- Each axis could connect analog joystick
- With I2C port, could use external 6050 to replace onboard sensor
- 3* AUX port
Specifications:
- Power supply: 9-18V(3-4S)
- Drive current: Max.1.5A
- Dimension: 5-5cm, M3 screw hole, 45mm pitch
- Weight: 10g
About Prime Living
Prime Living is a Canadian online store offering a carefully selected range of quality products for home, automotive, tools, outdoor living, electronics and more.
We are committed to fast order processing, secure packaging and reliable tracked shipping to provide an excellent shopping experience.
Shipping policy
We carefully handle each order to ensure your package arrives quickly and safely. Please note that factors such as weather, postal traffic, or carrier performance may occasionally cause delays beyond our control.
We provide free shipping and dispatch all orders within 2 business days of payment, often sooner. All shipments are sent via international express air shipping, with a tracking number provided so you can follow your order every step of the way.
. Please provide a physical address, as we do not ship to P.O. Boxes.
Returns
Your satisfaction is important to us. Hexlight offers a 14-day Free return policy: if you are not fully satisfied with your purchase, you may request either a full refund or an exchange. All return shipping costs are fully covered by us.
Condition
Brand New
Shipping
This item is shipped directly from our supplier in China with tracking.