Product Description
SenseCAP Meshtastic Solar Node Repeater 868Mhz Meshcore Mesh LoRa Node, XIAO nRF52840 Plus, SX1262 LoRa Module,Grove,L76K GPS
SenseCAP Meshtastic Solar Node Repeater 868Mhz Meshcore Mesh LoRa Node, XIAO nRF52840 Plus, SX1262 LoRa Module,Grove,L76K GPSFeatureIt is an economical solar-powered comms node or repeater based on Meshtastic. It meets basic comms needs in no - network zones. Unlike P1-Pro, P1 lacks a built-in GPS module and four 18650 batteries, yet keeps core comms. It's perfect for budget-constrained scenarios or those not needing precise location, like environmental monitoring and short - range network setups. The native firmware of this product is meshtastic. If you need Meshcore, you need to refer to the following wiki tutorial to flash the Meshcore firmware or contact me to obtain the wiki:https://wiki.seeedstudio.com/get_started_with_meshcore_solar_node/Note:
SenseCAP Solar Node P1is cost-effective and lacks the XIAO L76K GPS module and four 18650 batteries. But users can buy and install them independently.
For the model with positioning GPS and batteries, opt for theSenseCAP Solar Node P1-Pro.
P1 | P1-Pro | |
SenseCAP Solar Node | √ | √ |
• 18650 Batteries x 4 (Built - in) | x | √ |
• XIAO L76K GPS Module (Built - in) | x | √ |
| Mounting Brackets• Universal Joint• Connector• Hoop Bracket• Hoop Ring | √ | √ |
2dBi 868 - 915MHz Rubber Rod Antenna | √ | √ |
RF Cable: RP-SMA Male to RP-SMA Female-300mm | √ | √ |
Black Type-C Cable | √ | √ |
User Manual | √ | √ |
🌱Integrated with a5W solar panel, and supports external batteries (which need to be provided by users themselves).
🌱The device comespre-installed with Meshtastic firmwareat the factory. It can be seamlessly integrated into the Meshtastic ecosystem.
🌱Compatible with theGrove ecosystem, and supports plug-and-play of sensors such as temperature and humidity sensors, light sensors, etc.
🌱It is suitable forlong-term outdoor use.
🌱Supports 8 to 9KM Transmissioninopen areas. It can be used as an outdoor node or repeater, easily expanding the Mesh network and enhancing network coverage.
Specification
Main controller | XIAO nRF52840 Plus(Nordic nRF52840, ARM® Cortex®-M4 32-bit processor with FPU, 64 MHz, 256KB RAM, 1MB Flash, 2MB onboard Flash) |
LoRa Module | Wio-SX1262 Module(Semtch SX1262, TXOP=22dBm@862-930MHz) |
GPS Module | Users self-purchase and addXIAO L76K(Support GPS/GLONASS/Galileo) |
Antenna | LoRa: Type: Rod-shaped rubber antenna Frequency range: 868-915MHZ Gain: 2dbi |
GNSS: GPS L1 C/A: 1575.42MHz GLONASS L1: 1602MHz BeiDou B1: 1561.098MHz | |
Bluetooth 5.0 | |
Solar Panel | 5W |
Interface | Grove *1: IIC/GPIO |
USB-C debugging | |
Button | Power on/off |
Reset | |
User-defined | |
LED | Charging status indicator lights *2 |
Solar panel status indicator light *1 | |
Mesh heartbeat light *1 | |
User-defined *1 | |
Power supply | 5V |
Battery | P1 version without batteries; P1 Pro Version includes batteries 4 x 18650 lithium batteries (3350mAh each) |
Dimension | 191.2 x 201.2 x 42.1 mm |
🌱Overall effect diagram
🌱Accessories diagram
① | 2dbi, 868~915MHz rubber rod antenna | |
② | Universal joint bracket, angle adjustable. | |
③ | Bracket connector, can support the antenna | |
④ | RF Cable; RP-SMA Male to RF-SMA Female; 300mm | |
⑤ | Hoop bracket | Diameter: 70-100mm |
⑥ | Hoop ring |
⑦ | Power switch |
⑧ | Reset |
⑨ | User-defined |
⑩ | Red light on:Charging |
⑪ | Green light on:Charged |
⑫ | Yellow light on:Device is exposed to light. |
⑬ | Blue light:Mesh heartbeat |
⑭ | White light:User-defined |
⑮ | Type-C: 5V 1A |
🌱Dimension diagram
Application
🌱Outdoor Adventure:Send real-time location and text messages in areas without network coverage.
🌱Mesh Network Expansion:Serve as a Mesh relay node to expand the coverage of the existing Meshtastic network. Support multi-hop transmission, where data can be relayed through multiple nodes, enhancing network reliability.
🌱Educational Experiments:Learn about the development of Meshtastic and LoRa decentralized networks.
🌱Environmental Monitoring:Provide a Grove interface to connect sensors for remote monitoring of the environment (such as temperature, humidity, air quality, etc.).
Part ListSenseCAP Solar Node P1 (without GPS & battery) / SenseCAP Solar Node P1 Pro (wout GPS & battery) | x1 |
Mounting Brackets 🌱Universal Joint 🌱Connector 🌱Hoop Bracket 🌱Hoop Ring | x1 |
2dBi 868 - 915MHz Rubber Rod Antenna | x1 |
RF Cable: RP-SMA Male to RF-SMA Female-300mm | x1 |
Black Type-C Cable | x1 |
User Manual | x1 |
About Prime Living
Prime Living is a Canadian online store offering a carefully selected range of quality products for home, automotive, tools, outdoor living, electronics and more.
We are committed to fast order processing, secure packaging and reliable tracked shipping to provide an excellent shopping experience.
Shipping policy
We carefully handle each order to ensure your package arrives quickly and safely. Please note that factors such as weather, postal traffic, or carrier performance may occasionally cause delays beyond our control.
We provide free shipping and dispatch all orders within 2 business days of payment, often sooner. All shipments are sent via international express air shipping, with a tracking number provided so you can follow your order every step of the way.
. Please provide a physical address, as we do not ship to P.O. Boxes.
Returns
Your satisfaction is important to us. Hexlight offers a 14-day Free return policy: if you are not fully satisfied with your purchase, you may request either a full refund or an exchange. All return shipping costs are fully covered by us.
Condition
Brand New
Shipping
This item is shipped directly from our supplier in China with tracking.