Product Description
ADF4351 Module onboard STM32 single-chip phase-locked loop module 35M-4.4G RF signal source Sweeper
ADF4351 Module onboard STM32 single-chip phase-locked loop module 35M-4.4G RF signal source SweeperHighlights:
In view of ADF4351ADF4350 integrated phase-locked loop, we have introduced this phase-locked loop module with OLED display screen, host computer USB & serial port, integrated key operation, wide range voltage supply, good man-machine interface and other characteristics. The module can achieve 35MHz-4.4 GHz frequency output, point frequency, sweep frequency, frequency hopping and other basic work.
ADF4351-OLED module shipping listModule + gifts (USB-MINI cable*1, red and black DC cable*1, BNC male to SMA male high-frequency wire*1) + PDF schematic diagram + routine source code + after-sale technical support + electrostatic bag packaging + shockproof foamTips:(1) The module interface of our shop is clear and the performance is stable. Please perform functional verification under the corresponding experimental conditions in conjunction with the schematic diagram provided by our shop.(2) The basic parameters of this module are in the details page, providing PDF information of the module information and source code of the routine; no engineering files are provided, please be clear to the buyer, if you have any operation problems, you can consult customer service.(3) Buyers, before using the module, please read the details page of this module to understand the power supply and use restrictions, to avoid damage to the module due to improper operation.(4) Our modules are guaranteed to provide real module parameters, functions and pictures, and all modules will be shipped after detection.Please contact customer service after purchase, we will send the module information to your mailbox.
Module parameters
Module model: ADF4351-OLED
Module type: broadband PLL frequency source
Power supply voltage: DC-5V
Module current: 220mA (MAX)
Module communication protocol: SPI
Module provides routines: STM32F103CBT6; point frequency, frequency sweep
Routine platform: STM32F103X-M3; KEIL5 version source code
Module reference frequency: 100MHz; clock can be input externally
Reference frequency signal amplitude: 700mVpp(MIN)
Frequency stability: greater than 25PPM
Phase noise: different frequency phase noise
Module output frequency range: 35MHz-4.4GHz
Frequency control step: 0.1MHz
Frequency sweep step time: 1mS(MIN)
Module output power: 7dBm (MAX); different frequency output power is different
Module output interface: SMA; 24-hour salt spray anti-oxidation
Module output signal: sine wave or square wave
Module output channel: 2 differential channels
Module output impedance: 50 ohm matching
Signal characteristics of the module: 35MHZ--2.2GHz square wave (fundamental frequency division) 2.2GHZ--4.4GHz sine wave (fundamental wave)
Module features: phase-locked loop module with OLED display, USB communication port of the host computer, integrated key operation, wide-range voltage power supply, good human-computer interaction interface, etc. The module can achieve 35MHz-4.4GHz frequency output, point Basic functions such as frequency, frequency sweep, frequency hopping, etc.
Module application: RF signal frequency generator, sensor excitation source, line loss attenuation detection, scanning clock signal generator
Module specifications: 88*67*7mm; length*width*height-PCB size
Module weight: 35g
Module working temperature: 0-75℃; civil grade
Module description
The ADF4351-OLED is used in combination with an external loop filter and external reference frequency to implement an integer-N frequency-locked loop (PLL) frequency synthesizer.The ADF4351 has an integrated voltage controlled oscillator (VCO) with a fundamental output frequency range of 2200 MHz to 4400 MHz. In addition, with 1/2/4/8/16/32/64 crossover circuits, users can generate RF output frequencies as low as 35 MHz. For applications requiring isolation, the RF output stage can be muted. The mute function can be controlled by pins or software. At the same time provide auxiliary RF output, and can be turned off when not in use.
Precautions for using the module
(1) Since the module is a high-precision device, in order to avoid unnecessary interference, it is recommended to use a linear power supply.
(2) Correct power supply, reverse connection is prohibited, and the voltage should not exceed 6V.(3) It is recommended to use a good patch cord to connect the spectrum analyzer or oscilloscope to observe the output signal. Poor contact or poor quality wires may cause signal attenuation or excessive noise.(4) When the PLL module is properly powered, the frequency signal can be generated, and the key operation can realize the functions of point frequency and frequency sweep.(5) The distributed code does not include the USB port program, does not provide a microcontroller tutorial, and additional functions such as communication with the host computer need to be developed by themselves.(6) The phase noise, harmonics, power output and other corresponding indicators of the phase-locked loop module. The typical test parameters are included in the details.
Frequently asked questions
Q: The output waveform of ADF4351-OLED is not a sine wave, and the harmonics are very large?
A: ADF4351-OLED is a digital phase-locked loop. The frequency output below 2.2G is divided frequency output, the output waveform is similar to square wave, if you need a sine wave, you need an external filter.Q: Can the fastest sweep speed of ADF4351 be only 1mS? Can the minimum step be only 0.1MHz?A: The current loop bandwidth design and software design on the board, in order to support 35M-4.4G frequency can be output normally, so the minimum step and the fastest sweep time are fixed, and it is necessary to pursue smaller steps and faster sweep Time will require buyers to make hardware and software adjustments.Q: What are the two lights on the board for PLL module?A: Red is the power indicator, blue is the lock indicator, and both lights are on for normal operation. If the lock light is not bright or slightly bright, you can reset the MCU until the lock light is always on, the module is normal output.
About Elecdemo:
Elecdemonded in 2015 , Elecdemo is a well-established technology company that integrates supply , R & D , prodund sales , supporting agents , franchises , customization and bulk purchases . We are committed to provid our customers with the best electronic functional module products at the lowest price . We have a professional design and production team to providecustomer service to help our customers greatly improve the efficiency of development，learn and research.
About Transpiration:
1. Global shipping, (except for some countriesand APO/ FPO)
2. Import duties: Taxes are not included in theprice or shipping costs. Customs fees are the responsibility of the buyer.
3. If the package is not delivered within 30 days. please contact us. We will help you solve the problem.
About Delivery:
1. We will process the order in time after the payment is confirmed. Due to the difference in inventory status and time, we will choose to ship from our first warehouse for fast delivery.
2. We only send to the confirmed order address. Your order address must match your shipping address.
3.Service transit time is provided by the carrier, excluding weekends and holidays. Delivery time may vary, especially on holidays.
About guarantee:
1. manufacturers limited warrantyon defective items(excluding items damagedand/or misused after receipt). The accessory is backed by a 3 month warranty
2. The displayed image is taken in real time, but due to different production batches, thecolor may be different. The picture is for reference only, and the actual object is subjectto the final one
3. The defective item must be reported and reurned within the warranty period(if possible,in the original packaging
4. If the product features do not match the advertisement, we will bear all shipping costs.
About feedback:
1. If you are satisfied, please leave 5 stars positive feedback, we are very honored to receivea generous real assessment and photos, th !!!!
2. For any product or shipping problems, please contact us before opening a dispute orleaving any feedback/negative feedback, we will try our best to solve the problem untilyou are satisfied.
Returns and refunds:
1. You have 7 days to contact us and you will not be able to return from the receipt date after30 days. If the item has been owned by you for more than 7 days, it will be considered usedand we will not refund or replace it. with no exceptions! Return shipping costs are theresponsibility of the buver.
2. All returned items must be in original packaging, you must provide us with a shippingtracking number.
3. If there is a return, please contact us in advance, we will help you solve it. If it cannot besolved online, we will accept your return and refund it to you.
About Prime Living
Prime Living is a Canadian online store offering a carefully selected range of quality products for home, automotive, tools, outdoor living, electronics and more.
We are committed to fast order processing, secure packaging and reliable tracked shipping to provide an excellent shopping experience.
Shipping policy
We carefully handle each order to ensure your package arrives quickly and safely. Please note that factors such as weather, postal traffic, or carrier performance may occasionally cause delays beyond our control.
We provide free shipping and dispatch all orders within 2 business days of payment, often sooner. All shipments are sent via international express air shipping, with a tracking number provided so you can follow your order every step of the way.
. Please provide a physical address, as we do not ship to P.O. Boxes.
Returns
Your satisfaction is important to us. Hexlight offers a 14-day Free return policy: if you are not fully satisfied with your purchase, you may request either a full refund or an exchange. All return shipping costs are fully covered by us.
Condition
Brand New
Shipping
This item is shipped directly from our supplier in China with tracking.